The WEB ESP32 Installer was prepared by Rainer OE1KFR to simplify the flashing of the MeshCom firmware.
The WEB installer offers the current release version and a pre-release version in each case.
Link to the WEB-Installer: https://esptool.oevsv.at
Select Board, Release/Pre-Release, and FW Version
Connect, select USB interface
with INSTALL for programming
The Erase device selection also erases all basic settings such as call signs, additional hardware settings, etc.
Confirm
"Install" triggers the programming
NEXT terminates the programming
After that, you can open the serial console. But you don't have to 🙂