The sensor can process voltages of up to 36V DC and/or up to 20A DC. The sensor is connected to a LoRa node via I2C.- The sensor is automatically recognized at startup.
- The values can be displayed in the WEBService or with the --info command.
- Connections
- I2C - address 0x40
The sensor is not enabled on all boards. Currently (FW 4.40.a):
INA226 enabled
- E22-DevKitC, E22_1262-DevKitC, E22_1262_S3-DevKitC-1-N16R8, E22_1268_S3-DevKitC-1-N16R8, E22_XML-DevKitC
- LilyGo_T-Beam-1W, LilyGo_T3_S3_V1_3, LilyGo_T_Connect_Pro
- esp32-loraprs-e22, esp32-loraprs-ra01
- heltec_wifi_lora_32_V2
- ttgo-lora32-v21, ttgo_tbeam, ttgo_tbeam_SX1262, ttgo_tbeam_SX1268, ttgo_tbeam_supreme
- vision-master-e290
- wiscore_rak4631
INA226 has been shut down
- heltec_wifi_lora_32_V3 (Comment: “I2C fault”)
- heltec_wifi_lora_32_V4
- heltec_wireless_stick (Comment: “I2C fault”)
- heltec_wireless_tracker (Comment “I2C fault”)
- heltec_t114
- t_echo
- t_deck, t_deck_plus, t_deck_pro
- t5_epaper
- T-ETH-ELITE_1262
- vision-master-e213
- wireless-paper