MeshCom 4.0 Firmware current version 4.34y

There are two versions:
- T-DECK motherboard
- TFT display, keyboard, ESP32, LORA, SD
- GPS UBLOX
- T-DECK PLUS complete
- TFT display, keyboard, ESP32, LORA, SD, housing, 2000 mAh battery, external antenna
- GPS L76K
Features of the current firmware
- MAP module
- In the basic version, fixed cards are installed in the firmware
- Europe
- Germany
- Austria
- OE3
- OE1
- Further map material for reloading via SD card will follow
- In the basic version, fixed cards are installed in the firmware
- WEBServer
- Set SSID, PASSWD, WEBServer on via serial console
- TRACK mode
- Smart beacon dependent on movement speed and curve angle
- GPS is read out every 6 seconds
- GPS mode
- Time is set for a fixed
- Display of the number of satellites
- Signal quality display HDOP
- Keyboard short keys The keys with ALT + and SYM + must be released after pressing. The SYM + keys are not active in TAB "SND" and "SET"
- ALT + B
- switches the keyboard lighting on/off
- SYM + K
- Switch keyboard and TFT on/off
- SYM + L
- Switch TFT permanently to on or back to normal with timeout
- SYM + B
- Change TFT brightness (4 levels)
- SYM + O and I
- MAP zoom-out or zoom-in means it switches to the next map
- ALT + B
Hardware characteristics of T-DECK
- LCD display 2.8-inch, 320 x 240 pixels with touch
- Mini keyboard
- ESP32-CPU Dual-Core Processor
- 16MB Flash, 8MB PSRAM
- 2.4 GHz Wi-Fi & Bluetooth 5 (LE)
- SX1262 LoRa transceiver
- Trackball, Microphone (optional), Speaker