Rainer OE1KFR has programmed the appropriate APP for MeshCom 4.0 and makes it available for download.
Firmware version 4.35 d latest pre-release is required for full compatibility! If the firmware is updated from a version older than 4.34 w, an erase must be performed. If another application was flashed on the nodes, the MeshCom firmware must also be flashed with an erase.
As of FW version 4.34w, pairing and pairing pin are no longer required.
Please do not connect in the system settings under Bluetooth devices. Establish the connection directly in the app with the respective node.
Like the firmware, the source code for the app is also available on GitHub is also published.
Manuals (Thx to DG4NEU):
MeshCom-App-Manual-German
MeshCom-App-Manual-English
IPhone
Apple App Store Link:
https://apps.apple.com/at/app/meshcom/id6447483289
Install the APP and agree to the use of GPS.
iOS App Background fully supported.
Android
To install please use the Google Playstore:
https://play.google.com/store/apps/details?id=io.ionic.meshcom
Side-loading:
Dropbox link directly to the current release APK which can be installed directly.
Please do not forget it must: Location Service, Bluetooth and Messages must be allowed.
Android app in the background:
The behavior of whether the connection is maintained in the background and messages are also sent from the node to the app is different. There is still a limitation of the framework used here. However, at least all battery optimizations and restrictions of the app must be switched off in the app settings in the system settings! On Android 14 with a Motorola Moto g04, for example, the connection is maintained, messages are also received in the app, but no more notifications are triggered after a few minutes.
V4.25 Release Notes:
- Bugfix to show correctly DM Acknowledgement
- Bugfix show I2C Scan Result
- Buttons BME/P280, 680, 390, MCU811, AHT20 show RED if sensor not found
- Added new boards for correct naming
- Added Userbuttons for BMP390, AHT-20, SHT-21 Sensors
- Reorganized Sensor Buttons
- Added Setting Button to each Button instead of Save Config to Node
- bugfix Chat Messages with { in Text were not shown correctly
- Added Name Setting
- Added fixed IP Setting
- Added Temperature Offset Setting
- Added external UDP Interface Setting
- Added automatic TimeSync Phone every 20s -> Node (pauses when App in background)